Power Grip PO Clutches Dimensions
 DIMENISIONS inches (mm)
Size
Teeth
A
B
C
 Max Bore
D
E
F
G
H
I
J
114
59
14.00 (355.60)
10.00 (254.00)
3.500(88.90)
4.39 (111.50)
.19 (4. S3)
.88 (22.35)
5.87 (149.10)
1.55 (39.37)
1.40 (35.56)
18.50 (469.90)
214
5.77 (146.56)
7.25 (184.15)
314
7.1 4 (181. 36)
8.62 (218.95)
118
75
18.00 (457.20)
9.00 (228.60)
4.500 (114.30)
4.80 (121.92)
.27 (6.86)
1.08 (27.43)
6.28 (159.51)
1.74 (44.20)
1.40 (35.56)
22.50 (571.50)
218
6.42 (163. 07)
7.90 (200.66)
318
8.05 (204.47)
9.53 (242.06)
124
99
24.00 (609.60)
17.75 (450.85)
6.000 (152.40)
5.93 (150.62)
.66 (16.76)
1.44 (36.58)
7.41 (188.21)
2.50 (63.50)
1.40 (35.56)
28.88 (733.55)
224
7.63 (193.80)
9.11 (231.39)
324
9.38 (238.25)
10.86 (275.84)
230
123
30.00 (762.00)
20.75 (527.05)
7.000(177.80)
8.49 (215.65)
1.00 (25.40)
1.88 (47.75)
9.78 (248.41)
2.44 (62.00)
1.40 (35.56)
34.50 (876.30)
330
10.39 (263.91)
10.39 (263.90)
 Air Inlets:1/4" NPT  Consult Factoryfor Drawing before Final Layout

 

« Plate separators and oversize release springs insure positive mechanical plate separation.

« No adjustments for the life of the friction material. Diaphragm compensates for wear.

« All clutches come standard with mechanical lockup feature for emergency use.

« Large diaphragm actuator provides more torque and minimizes release drag.

« Retained springs within the plate separator allow for easier servicing.

« Quick release valves are included on all clutches.
 
 
 
     
Copyright © 1992-2007, WPT® is a registered trademark of WPT Power Transmission Corporation, Twin Disc® is a registered trademark of Twin Disc Corp., and Wichita Clutch® is a registered trademark of Wichita/Altra. WPT is not an authorized original equipment manufacturer of Twin Disc® or Wichita Clutch® products.