~ Steel Water Cooled Brakes ~        
     
Overview
Water Cooled Brakes		 Specifications
 118 - 436
Dimensions
A~ L | M~S
Series Hose Arrangement
Typical Closed loop cooling system		    
 
 

Water Cooled Brakes Dimensions
 DIMENISIONS inches (mm)

SIZE

M
N

O
P
AIR INLETS

Q

R

S
MOUNTING HOLES
BORE RANGE
SIZE (NPT)
BOLT CIRCLE
QTY

SIZE

BOLT
CIRCLE

QTY2
SIZE
BOLT
CIRCLE
MINIMUM

MAXIMUM3

118

1 5/8 (41.3)

3 5/8 (92.1)

1/4 (6.4)

1/2-14

14.187 (360.36)

30°

N/A

N/A

N/A

10

21/32 (16.7)

22.000 (558.80)

2 1/4 (57.2)

5 25/32 (146.8)

218

1 5/8 (41.3)

71/8 (181.0)

1/4 (6-4)

1/2-14

14.187 (360.36)

30°

N/A

N/A

N/A

10

21/32 (16.7)

22.000 (558.80)

2 1/4 (57.2)

5 25/32 (146.8)

318

1 5/8 (41.3)

11 5/16 (287.3)

1/4 (6.4)

1/2-14

14.187 (360.36)

30°

N/A

N/A

N/A

10

21/32 (16.7)

22.000 (558.80)

2 1/4 (57.2)

5 25/32 (146.8)

124

1 3/8 (34.9)

3 1/2 (88.9)

1/4 (6.4)

1/2-14

18.500 (469.90)

30°

6

3/8-16

12.250 (311.15)

10

21/32 (16.7)

28.750 (730.25)

2 3/4 (69.9)

7 (177.8)

224

1 3/8 (34.9)

8 5/8 (219.1)

1/4 (6.4)

1/2-14

18.500 (469.90)

30°

6

3/8-16

12.250 (311.15)

10

21/32 (16.7)

28.750 (730.25)

2 3/4 (69.9)

7 (177.8)

324

1 3/8 (34.9)

13 3/16 (335.0)

1/4 (6.4)

1/2-14

18.500 (469.90)

30°

6

3/8-16

12.250 (311.15)

10

21/32 (16.7)

28.750 (730.25)

2 3/4 (69.9)

7 (177.8)

424

1 3/8 (34.9)

1615/16 (430.2)

1/4 (6.4)

1/2-14

18.500 (469.90)

30°

6

3/8-16

12.250 (311.15)

10

21/32 (16.7)

28.750 (730.25)

2 3/4 (69.9)

7 (177.8)

136

2 3/8 (60.3)

5 (127.0)

9/32 (7.1)

3/4-14

28.000 (711.20)

22.5°

6

1/2-13

17.500 (444.50)

14

1 1/16 (27.0)

42.000 (1066.80)

4 (101.6)

10 1/8 (257.2)

236

2 3/8 (60.3)

9 (228.6)

9/32 (7.1)

3/4-14

28.000 (711.20)

22.5°

6

1/2-13

17.500 (444.50)

14

1 1/16 (27.0)

42.000 (1066.80)

4 (101.6)

10 1/8 (257.2)

336

2 3/8 (60.3)

13 (330.2)

9/32 (7.1)

3/4-14

28.000 (711.20)

22.5°

6

1/2-13

17.500 (444.50)

14

1 1/16 (27.0)

42.000 (1066.80)

4 (101.6)

10 1/8 (257.2)

436

2 3/8 (60.3)

18 (457.2)

9/32 (7.1)

3/4-14

28.000 (711.20)

22.5°

6

1/2-13

17.500 (444.50)

14

1 1/16 (27.0)

42.000 (1066.80)

4 (101.6

10 1/8 (257.2)

1 36" BRAKES: +.000/-.005 (+.000/-0.127)
2 18" and 24" brakes have (10) mounting holes based on a (12) hole pattern.
  36" brakes have (14) mounting holes based on a (16) hole pattern.

  Contact Customer Service for drawing before finalizing design. Certified prints available on request.

  • Designed for constant slip
  • High thermal capacity
  • Long wearing copper wear surface for greater heat transfer
  • Airtube or piston actuation
  • Airtube delivers smoother response and enhanced control
back to top     products index    overview
 
 
     
Copyright © 1992-2007, WPT® is a registered trademark of WPT Power Transmission Corporation, Twin Disc® is a registered trademark of Twin Disc Corp., and Wichita Clutch® is a registered trademark of Wichita/Altra. WPT is not an authorized original equipment manufacturer of Twin Disc® or Wichita Clutch® products.